Satellite Broadband Out Door Units (ODU)

outdoorunits

The term ODU is used in Split-Mount Microwave systems where an Indoor Unit (IDU) is typically mounted in an indoor location (or weatherproof shelter) connected via a coaxial cable to the ODU which is mounted on a rooftop or tower top location.

Often the ODU is direct mounted to a microwave antenna using “Slip fit” waveguide connection. In some cases, a Flexible Waveguide jumper is used to connect from the ODU to the antenna.

The ODU includes a satellite reflector and feed, transmit and receive electronics, and a mounting kit, and is available with either pole-mount or universal wall mount.

The ODU converts data from the IDU into an RF signal for transmission. It also converts the RF signal from the far end to suitable data to transmit to the IDU.

Generally, Microwave ODUs are designed for full duplex operation, with separate signals for transmit and receive. On the airside interface this corresponds to a “pair” of frequencies, one for transmit, the other for receive. This is known as “FDD” (Frequency Division Duplexing)